![]() ![]() Remove the basting stitching and turn the fabric right side up. Sew at a slow speed holding the fabric with your hands, so that the needle slightly catches the fold of the hem.ġ2. Once you pull the stitches tight, the seam closes up and your sewing becomes almost invisible, just like a seam sewn with right sides together. Adjust the stitch width until the needle slightly catches the fold of the hem.ġ1. Position the fabric under the presser foot. After selecting a stitch, slowly turn the handwheel toward you until the needle has moved from the right to the left.ĩ. Slide the part that you wish to sew onto the arm, make sure that the fabric feeds correctly, and then start sewing.Ĩ. Remove the flat bed attachment and make free-arm sewing possible.ħ. Unfold the edge of fabric, and position the fabric with the wrong side facing up.Ħ. Fold back the fabric inside along the basting.ĥ. How to do blind stitch on a sewing machine. If that is not possible, it is better to do it by hand. Use a chalk to mark on the fabric about 5mm (3/16 inch) from the edge of the fabric, and then base it.Ĥ. The blind hem stitch needs a stretchable thread on the sewing machine if you are doing the blind hem stitch on a widening hem. Fold the fabric along the desired edge of the hem, and press with an iron.ģ. Reverse the skirt or pants that you will be using a blind hemstitch on.Ģ. When the size of cylindrical pieces is too small to slide onto the arm or the length is too short, the fabric will not feed and desired results may not be achieved.ġ. The best stitch for mending a seam rip is the simple straight stitch. ![]() PRESS & TURN-Turn the garment back to the right side and give it a good press. You can do this with a machine straight stitch or a hand stitch. Stretch Blind Hem Stitch: for stretch fabrics STITCH - Stitch along the seam where the stitches have broken. You can use the Blind Hem Stitch to finish the edge of a project, like the hem of a pair of trousers, without the stitch showing.īlind Hem Stitch: sewing on non-stretch fabrics. Even though your machine may not match the model on the screen, the overall process will be the same. Follow the instructions below for blind hem stitching: ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |